Autonics Photoelectric Sensor, Photoelectric Type BRQM30M-TDTA-P Stroke_45112^1050mm (mm) Jaw height (mm) Jaw

(mm) Jaw height (mm) Jaw length (mm) Weight approx

75 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 15 A at 50 °C Protection type Short-circuit protectionOverload protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 8500 cycles Electrical durability Category A: 1500 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 25 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 130 mm Width 75 mm Depth 60 mm Environment Standards JIS C8201-2-2EN/IEC 60947-1GB/T 14048

Item # d D B r Static Load Rating Dynamic Load Rating 2219 3

Medium size of JIS standard

Specification item model symbol Specification information With auto switch D With auto switch installation support B Basic type tube material - aluminum tube tube inner diameter 63 Bore size 63mm Types of port screws - Rc cylinder stroke 75 Cylinder stroke 75mm Cylinder additional symbol - No bellows

Autonics Photoelectric Sensor, Photoelectric Type BRQM30M-TDTA-P Stroke_45112^1050mm (mm) Jaw height (mm) JawSensing type Through beam type Sensing distance 30m Sensing target Opaque material of min. 7mm Light source Red LED(660nm) Response time Max. 1ms Power voltage 10 30VDC 10%(ripple P P: max. 10%) Current consumption Emitter Receiver: Max. 20mA Sensitivity adjustment Sensitivity adjuster Operation mode Light ON Dark ON(set by control wire) Control output PNP open collector Connection type Cable type(4, 2m) Environment_Ambient illumination Sunlight: Max.