IILCA Cam Cleat Plate And Loops Smocks Pre-fitted with 5m Coaxial cable

Pre-fitted with 5m Coaxial cable and FME plug/socket for easy insallation

6-10mm Line

5 amp fuse

Ball Bearing Orbit Blocks boast the highest strength to weight ratio available

Triplex 3 chamber automatic pressure pump gives flow up to 3 US Gallons per minute (11

IILCA Cam Cleat Plate And Loops Smocks Pre-fitted with 5m Coaxial cableThe Cam Cleat Plate is the base plate used to hold the cam cleats which cleat off the outhaul and cunningham ropes. It is situated infront of the centreboard case. The loops fit into the grooves of the cam cleat plate and insure that the ropes go straight through to the cleat and are not able to get caught in other thigns or jump out of the cleats if pressure was provided upwards from behind the cleats.