Ecofreen Transfer Film for Direct to Film (Hot Peel DTF) 13" x 109yd Roll Epson P-Series If you already have the

If you already have the Master Adaptor then all you need is the Face Mask Platen to print full color images on face masks in seconds

Made to hold 120mm 120mm film box  2

50/50 hole pattern allows visibility for vehicle graphics

This heavyweight textured paper does not contain optical brighteners and is characterised by its high stability

Job Preparation

Ecofreen Transfer Film for Direct to Film (Hot Peel DTF) 13" x 109yd Roll Epson P-Series If you already have theEcofreen Transfer Film (Hot Peel) for Direct to Film (DTF) Process: Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink) Apply EcoFreen powder evenly and remove the excess powder. Advise using a shaker machine or medium tub with proper PPE. Hover with a heat press to bake the hot melt powder. 330F, 3 5 min depending on the setting you have chosen for your graphic design. Or use a curing oven (265 285F, 2min). Transfer the