Pro-Tools Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD 4-1/2" CLR) Project Blocks The jig supports the drawer

The jig supports the drawer slide level and straight while you install it in the cabinet

Oilite Bronze Bushing Allows For Less Friction and Longer Life

Made from durable

This bit is typically used at the corners of casework this bit cuts both halves of the joint

This Panel Bit with Back Cutter allows you to cut the Front Reveal and the optional Back Cut at the same time while guaranteeing a 1/4” tongue in the process

Pro-Tools Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD 4-1/2" CLR) Project Blocks The jig supports the drawerSpecs Outside Diameter of the Tubing (OD): 1 1 8" (28. 6 mm) Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2 (114. 3 mm) Maximum