Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" Good for 10-20 gpm and

Good for 10-20 gpm and 800 to 2000 psi operating pressure

moving debris in invert

they are sanded smooth and then oiled for protection

- 5" Diameter

This 90º 4-pronged rake is made to grab roots and debris in sewers and Storm drains

Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" Good for 10-20 gpm andThis tool you can use to push, pull or turn the rods. You can slide this tool right over the rod and it will slip over the coupling to allow you to push or pull the sectional rods. Insert the pin through the center hole of the coupling and you can turn the rods too. This is done with hand rodding. Pick for either your 5 16 or 3 8 rods. Made of steel and zinc plated.