Otto Frei 4-1/2" Bent Nose Prong Pulling Pliers-German Made Dies & Molds The system arrives fully assembled

The system arrives fully assembled and ready to operate — simply plug into a standard 115V wall outlet with 15-amp service

or it can be permanently mounted using self-supplied screws through three holes in the mounting base

a companion small version is also available — see part number 127

Includes two matching punches: 58mm and 63mm

HICAP cartridge filter (installed)

Otto Frei 4-1/2" Bent Nose Prong Pulling Pliers-German Made Dies & Molds The system arrives fully assembledThe Otto Frei 4 1 2" Bent Nose Prong Pulling Pliers are a modified chain nose design engineered specifically for controlled prong lifting. The lower jaw is grooved to cradle and support the prong during the lift, while the upper jaw is slightly cut back and hooked to catch securely under the tip of the prong as it rests against the stone. This geometry gives the setter precise, repeatable leverage with reduced risk of marring the prong or stone.