Tork Craft | Lock Mortising Attachment with 17mm Cutter Einhell_Mitre Saw Battery voltage 18

Battery voltage 18

Set of 3 bushings for Streamline and other 7mm kits

The flush trim router bit cuts a variety of materials from wood

These blades are one of three types that are designed to fit the OLFA® X-DESIGN™ range of XSR scrapers

Stroke adjustment dial regulates engraving depth from fine lines to deep grooves

Tork Craft | Lock Mortising Attachment with 17mm Cutter Einhell_Mitre Saw Battery voltage 18Lock Mortising Attachment Jig to be used with an electric drill to bore out a mortise to fit a door lock. Application The jig is clamped onto a door to cut a mortise for the fitment of a door lock. A drill is attached to the jig with the following requirements: The chuck needs to be removed to expose the 20UNF thread. The drill will be clamped on the collar (46mm). The drill will be part of the jig and will thus be a semi permanent addition. The