Tork Craft | Chuck & Key 1,0-13,0mm B16 Taper Corded_Biscuit Joiner Front base with 3 chamfering

Front base with 3 chamfering grooves

Precautions

A simple quarter turn of the corner mounted Cam-Lock

wear a dust mask during sanding works

WIRE WHEEL BRUSH 75MM

Tork Craft | Chuck & Key 1,0-13,0mm B16 Taper Corded_Biscuit Joiner Front base with 3 chamfering13mm Drill Chuck with key 13mm Keyed chuck with B16 taper. A correct taper adapter may be required to fit the chuck to your machine application. This version is Metric Taper B16. B16 taper Opening capacity: 13mm All metal construction Chuck key included Installation Info: Clean both tapers of all grease and grit. With the chuck jaws completely retracted into the chuck and using a thin piece of wood to protect the chuck nose, tap the chuck into place